
SerVision Embedded Video Gateway System Guide
Configuring System Settings 43
Figure 43: Modem 1 Enabled (GSM settings)
4. If you selected CDMA, fill in the fields as follows:
If the cellular supplier requires a username, fill in the username.
If the cellular supplier requires a password, fill in the password.
Select Enabled if you want the system to periodically test the network connection after it is
established (see page 41).
Select Enabled if the cellular supplier uses CHAP authentication.
5. If you selected GSM, fill in the fields as follows:
If the cellular supplier requires a username, fill in the username.
If the cellular supplier requires a password, fill in the password.
Fill in the APN of the cellular network.
If the SIM card of the modem requires a PIN to establish a connection, select Use. The
PIN Code field is added to the screen.
Type the PIN code into the field.
The phone number that the modem should dial to connect to the internet via the GSM
cellular network. This number is normally *99# throughout the world.
Select Enabled if you want the system to periodically test the network connection after it is
established (see page 41).
Select Enabled if the cellular supplier uses CHAP authentication.
Comentários a estes Manuais