SerVision CVG-M Informações Técnicas descarregar pdf (Página 94)

SerVision Embedded Video Gateway System Guide

Configuring Camera Settings 93

9. Under Maximum Event Length, specify the maximum length of a VMD event, in seconds. Range: 60–86400

seconds (1 minute – 1 day). If motion is detected continuously for longer than this period of time, a new event

is automatically generated at the end of this interval.

10. Under On Motion Detected, select the actions that the Video Gateway should perform if motion is detected,

as follows:

Field

Description

AVV

Select this option to have the Video Gateway send video of the event to an AVV server for

downloading. The video is uploaded to the site defined in the AVV screen, in the format

defined there (see

Automatically Uploading Video to an AVV Server

, page 64), and e-mail

notifications are sent to all e-mail recipients (see

SMS and E-mail Notifications

, page 58).

Note: The upload of the video clip begins at the

end

of the motion event. Nevertheless,

the first e-mail notification is sent when the event is first detected. Thus, the video clip

may not be available yet when you receive this e-mail notification. A second e-mail

notification is sent when uploading is completed.

Note: This feature only works if recording (either event-triggered or continuous) is

activated for the camera (see

Video Recording Settings

, page 96).

Note: This option only appears if AVV is activated for the Video Gateway (see

Automatically Uploading Video to an AVV Server

, page 64).

SMS

Select this option to have the Video Gateway send SMS notifications when a motion event

is detected. Messages are sent to the recipients specified in the SMS and E-mail screen,

in the format defined there (see

SMS and E-mail Notifications

, page 58).

E-mail

Select the desired type of e-mail notification, as follows:

 None: Do not send e-mail notifications when a motion event is

detected.

 Text only: When a motion event is detected, send e-mail notifications.

Include a text message in the e-mail, but do not attach any images to

the message.

 Text & image: When a motion event is detected, send e-mail

notifications that include both a text message and a picture of the first

frame of the event.

Note: E-mail messages are sent to the recipients specified in the SMS and E-mail

screen, in the format defined there (see

SMS and E-mail Notifications

, page 58).

Note: If AVV is selected, Text & image is automatically selected for this field, and

cannot be disabled. A single e-mail containing both the standard notification text and the

AVV notification is sent at the beginning of each event. In addition, a text-only e-mail is

sent when the file transfer is completed.

Note: If AVV was once selected, and has since been cleared, Text & image remains

selected for this field until the selection is changed manually. If it is not changed, AVV is

not activated, but notifications with snapshots are sent at the beginning of each event.

Activator 1

Activator 2

Select the action that each activator should perform when a motion detection event

begins:

 Turn on: Set the activator line to “high.”

 Turn off: Set the activator line to “low.”

 None: Do not change the activator’s setting.

Note: For additional information about working with activators, see

Configuring Sensor

and Activator

Settings, page 110.

Note: The Activator 2 field only appears for the HVG, MVG, and UVG.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 202 203

Comentários a estes Manuais

Sem comentários

SerVision CVG-M Informações Técnicas Página 94

Comentários a estes Manuais